Clients are welcome to visit our new home – We also provide FREE DELIVERIES TO STEVENAGE, LETCHWORTH & HITCHIN

Freestanding illuminated SEG fabric lightbox

Ready to order?
See the current formats and order the product online.

Order Online Now

If you are asking what is an SEG fabric lightbox, this guide explains the illuminated frame, silicone-edge graphic and replacement options.

What Is an SEG Fabric Lightbox?

An SEG fabric lightbox is an illuminated aluminium frame fitted with a tensioned printed textile graphic. SEG stands for silicone edge graphic. A flexible silicone strip is stitched around the print and pushed into a narrow channel around the frame.

How the graphic stays flat

The silicone edge pulls the fabric evenly across the opening as it is inserted. The fastening disappears inside the channel, leaving a clean perimeter without visible clips, eyelets or a separate front cover.

How edge lighting works

LEDs inside the frame direct light through the printed backlit fabric. Even illumination gives photographs, colour fields and product graphics more visual presence than an unlit banner. High-resolution source files and controlled tonal detail matter because light can reveal weak images and uneven tonal transitions.

What size should you choose?

The free-standing Smiths system is 2250mm high in four widths: 850mm, 1000mm, 2000mm and 3000mm.

Width Typical role
850mm Narrow entrance or compact stand panel
1000mm Single portrait campaign or product message
2000mm Exhibition backdrop or wider visual story
3000mm Large illuminated wall for high-impact spaces

Check height restrictions, stand boundaries and access routes. Large frames require enough clear floor area to assemble and handle safely.

Why a kit includes two graphics

Two printed faces allow the free-standing display to work in open spaces where both directions are visible. This is useful for island exhibition stands, windows and event entrances.

Can the graphics be replaced?

Yes, when the replacement is produced for the exact frame. Frame dimensions, textile stretch, silicone size and sewing position all affect fit. Keep the system specification with the artwork files so future campaigns can be produced accurately.

Plan for delivery and set-up

The complete kit includes the frame, LEDs, cables, two printed graphics and a wheeled case. Hardware and printed fabric may follow different production schedules, so the packages can arrive separately. Inspect both before travelling to the event.

See SEG lightbox sizes and configure a display

How the graphic is fitted

  1. Assemble and stabilise the frame following the hardware instructions.
  2. Identify the top edge and correct face of the graphic.
  3. Insert the silicone at the corners first, then work along each edge.
  4. Smooth the fabric as the remaining silicone enters the channel.
  5. Connect and test the lighting before the public opening.

Do not pull one edge fully home while the opposite side is loose; even tension helps prevent ripples.

Briefing a replacement print

Provide the original frame reference, visible size and finished graphic specification. A photograph alone is not enough because frames that look similar can use different channels and fabric allowances. Keep one approved artwork template with the hardware record.

Common artwork mistakes

  • Using images that only look sharp on a laptop screen
  • Putting small text too close to the silicone edge
  • Designing dark, low-contrast areas without considering illumination
  • Forgetting that both supplied faces may be visible at the same time
  • Checking colour only on an unlit office proof

Quick questions

What does SEG stand for?

Silicone edge graphic.

Can a graphic be reused?

It can be removed and carefully refitted, while replacement graphics can be produced for the same frame.

Does every SEG graphic fit every frame?

No. It must match the exact frame and channel specification.

For artwork preparation, Adobe provides guidance on setting print bleed. Confirm the production template, safe area and final PDF before supply.

Our local service area

Smiths 1972 is based in Stevenage, Hertfordshire, and supports organisations across Hertfordshire, Bedfordshire, Buckinghamshire and London. Our regular service area includes Hitchin, Letchworth Garden City, Welwyn Garden City, Hatfield, Hertford, St Albans and Watford.