Clients are welcome to visit our new home – We also provide FREE DELIVERIES TO STEVENAGE, LETCHWORTH & HITCHIN
Prefer to call?
Office reception and meeting-suite refreshes. Survey, finish selection and installation planning for commercial premises.
Retaining a sound fixture can be more practical than removing it simply because its visible finish has dated. For Sipson, this planning guide examines office reception and meeting-suite refreshes through future-repair planning for a brand refresh. The working scope is reception desks, meeting-room doors and storage fronts.
Loose coatings, contamination, movement, broken corners and unresolved moisture need diagnosis before they become hidden beneath a new finish. The survey should specifically address cable routes, access-control hardware and repeated door contact.
The material review can include 3M™ DI-NOC™ Architectural Finishes, Cover Styl and Metamark MIA. Each range has its own technical information, finish options and application limits, so the selected product must follow the substrate survey, approved sample and expected cleaning regime.
Samples of walnut, brushed metal and charcoal matte finishes should be viewed in the working light and beside the materials that will remain. Delivery must also account for weekend phases around occupied offices and booked meeting rooms.
Our commercial architectural wrapping service covers surface assessment, material selection and installation. If your specification names 3M, see our DI-NOC installation service.
For a project in Sipson, send the site postcode and scope so we can confirm survey and installation availability.
Request a quote. Send your project postcode, surface photographs, approximate dimensions or quantities, preferred finish and installation date. We can then confirm suitability, access requirements and the next step.
Number the items within Sipson and measure reception desks, meeting-room doors and storage fronts separately. Record construction, coating, dimensions, corners, fittings, repairs and access. Pair each line with a labelled photograph so later decisions can be traced.
Identify repeatable components and any areas likely to need isolated repair later. Identify exclusions at the same time, including unstable surfaces, unresolved moisture and defects outside the wrapping allowance.
Place samples of walnut, brushed metal and charcoal matte finishes beside the intended item and assess them from the approach route as well as close up. Use one desk return, meeting-room door and frame junction to test grain, sheen, corners and the transition to materials that remain.
The approval record needs the manufacturer, range, product code, orientation and signed physical sample. A screen image is not a controlled finish reference.
The Sipson programme must accommodate weekend phases around occupied offices and booked meeting rooms. Confirm delivery, storage, induction, permits, work-zone boundaries and the person authorised to return each area to use.
Protect normal operations while establishing a consistent order for preparation, wrapping and inspection. Preparation and cure or settling requirements should appear in the sequence instead of being absorbed into an unrealistic installation allowance.
Map every installed finish in Sipson to its survey reference. Include brand, range, code, orientation, edge treatment, exclusions and care information, with special attention to desk edges, door hardware and routine office cleaning.
The project aims at modernising the arrival sequence without replacing serviceable desks and joinery. Retain product references, batch information and labelled photographs for future matching. Any retained spare material should be labelled by product and location.
Before material is ordered for Sipson, reconcile measured quantities with the approved sample around one desk return, meeting-room door and frame junction. Verify the substrate notes, manufacturer, code, direction, edge treatment and work sequence.
Discuss cable routes, access-control hardware and repeated door contact with the project lead and test the plan for weekend phases around occupied offices and booked meeting rooms. Name the people responsible for product approval, access, daily handback and final acceptance.
Keep those decisions with the photographs and schedule. Use the agreed brief to check the finished work before handover.
The selected film, measured area, condition of the substrate, preparation, edges and access affect the price. Compare the full installed scope with replacement, including repairs and making good, rather than comparing material prices alone.
Begin with reception desks, meeting-room doors and storage fronts. Check stability, coatings, edges, fittings and preparation before the quantity or product is finalised.
The surveyed application may lead to 3M DI-NOC Architectural Finishes, Cover Styl or Metamark MIA. Choose the exact range through technical review, physical sampling and care requirements.
The outline allows for weekend phases around occupied offices and booked meeting rooms. The final method and handback process must be agreed with the person responsible for the building.
No. The substrate and coating must be sound and compatible with the selected film. Loose paint, movement, moisture and damaged edges may require repair or make wrapping unsuitable.
Send the site postcode, photographs, approximate dimensions or quantities, the intended finish and your preferred dates. Include access restrictions and any drawings or product references already specified.
Want to discuss your project?