
Ready to order?
See the current formats and order the product online.
This printed tablecloth size guide explains how to measure trestle and round tables, compare drop lengths and choose a practical printed cover.
Printed Tablecloth Size Guide: Trestle and Round Tables
A printed tablecloth needs to fit the furniture, the way people will use it and the message you want visitors to see. Start with measurements rather than choosing by the event-space size.
Measure the table first
For a trestle table, record the tabletop length, width and height from the floor. Standard online covers are available for 4ft, 6ft and 8ft trestle tables. For a round table, measure straight across the centre of the tabletop to find the diameter. Standard round options cover 900mm and 1200mm tables.
300mm or 600mm drop?
The drop is how far the cloth hangs below the tabletop.
| Drop | Best for | What remains visible |
|---|---|---|
| 300mm | Seated staff, meetings and demonstrations | Most of the legs and under-table space |
| 600mm | Exhibition counters, registration desks and product displays | Much less of the frame and stored items |
A short drop gives knees and chairs more clearance. A deeper drop provides a larger branded face and hides more of the furniture. Think about where the table will be viewed from: a cover that looks right from the front may expose equipment from the side.
Square or rounded corners?
Trestle covers can use square or rounded corners. Square corners maximise the straight printed edges. Rounded corners soften the shape and reduce excess fabric at the corners. The practical choice depends on the table frame, the preferred appearance and whether staff regularly move around the ends.
Place the artwork where it will be seen
Put the main logo and short message on the front drop, not only on the tabletop. Leaflets, laptops and stock usually obscure the top during an event. Keep small text away from seams and corners, and preview the design at the likely viewing distance.
Fabric, print and venue checks
The Smiths standard cover uses dye-sublimation printed stretch polyester. It is washable and fire rated M1/B1. Confirm the organiser’s current fire-certification requirements before the event, especially when several venues are involved.
When you need a custom size
Request a bespoke quote if the table falls outside the standard formats, has an unusual shape or requires a specific floor clearance. Send the tabletop dimensions, height, photographs and any access or venue constraints.
Compare the printed tablecloth options and order online
Common sizing mistakes to avoid
- Ordering from the event stand dimensions instead of the table dimensions
- Forgetting the table height when a particular floor clearance matters
- Placing the logo on the tabletop where equipment will cover it
- Choosing a deep drop without allowing knee and chair space
- Assuming every venue accepts the same fire-rating evidence
Before sending artwork
Ask the designer to use the correct template for the chosen table, drop and corner style. Confirm the main viewing side, outline or embed fonts, and supply linked images at suitable resolution. If several covers must match across an event programme, keep a record of the exact product configuration with the artwork.
Care and packing
Clean the cover according to the supplied care instructions, allow it to dry fully and fold it neatly for transport. Do not pack damp fabric with metal exhibition hardware. A labelled bag helps event teams match each cover to the right table when several sizes travel together.
Quick questions
How do I measure a trestle table?
Measure the tabletop length, width and height, then match the length with the 4ft, 6ft or 8ft standard.
Which drop should I choose?
Choose 300mm for easier seated use and 600mm for a stronger counter-style display.
Can I order a custom size?
Yes. Provide the measurements and shape for a quotation.
For artwork preparation, Adobe provides guidance on setting print bleed. Confirm the production template, safe area and final PDF before supply.
Our local service area
Smiths 1972 is based in Stevenage, Hertfordshire, and supports organisations across Hertfordshire, Bedfordshire, Buckinghamshire and London. Our regular service area includes Hitchin, Letchworth Garden City, Welwyn Garden City, Hatfield, Hertford, St Albans and Watford.