Clients are welcome to visit our new home – We also provide FREE DELIVERIES TO STEVENAGE, LETCHWORTH & HITCHIN
Home » Printing » Exhibition and Event Printing » Printed Tablecloths
Custom printed tablecloths turn an ordinary trestle or round table into a complete branded display. Your artwork is dye-sublimation printed across stretch polyester, so logos, colour and supporting graphics become part of the fabric rather than a surface transfer.
Choose a cover for a 4ft, 6ft or 8ft trestle table with a 300mm or 600mm drop. Round versions are available for 900mm and 1200mm tables with the same two drop depths. Trestle covers can have square or rounded corners.
The fabric is washable and fire rated to M1/B1. The usual production guide is 3 to 5 working days after artwork approval; the live checkout shows the current service.
Start with the tabletop shape and nominal size, then decide how much of the legs you want to cover. A 300mm drop gives a shorter, seated-friendly finish and leaves more space around chairs. A 600mm drop reaches much closer to the floor and creates a stronger display-counter effect.
Place the main logo where it will remain visible when staff, stock or leaflets are on the table. Use the front drop for the most important message, and treat the top and side panels as supporting space. A simple design usually reads more clearly across a busy exhibition hall than several small messages.
Supply artwork at the requested scale with fonts outlined or embedded. We check supplied files for practical print suitability and contact you if something needs attention.
For a complete stand, combine your table cover with a roller banner or a pop-up exhibition display.
Use our printed tablecloth size guide to compare drop depths, corners and standard furniture sizes.
A 300mm drop covers the top and a shorter section of each side, which is useful when people sit at the table. A 600mm drop reaches much closer to the floor and gives more printed display area.
Yes. The dye-sublimation print is made for washable polyester. Follow the care instructions supplied with the finished cover.
Yes. The standard stretch polyester is rated M1/B1, which is commonly requested by exhibition venues. Always confirm the venue’s current rules for your event.
Yes. The artwork can use the available printable area across the cover rather than being limited to a small applied logo.
Yes. Contact us with the table measurements and shape for a custom quotation.
The usual guide is 3 to 5 working days after artwork approval. Check the live configurator for the current service.
Exhibitors, event teams, retailers, schools, charities, hospitality venues and organisations that need a portable branded table or counter.
A 300mm drop is shorter and seated-friendly. A 600mm drop reaches much closer to the floor and provides more display area.
Yes. Follow the care instructions supplied with the finished cover.
Yes. The standard stretch polyester is rated M1/B1.
Yes. The artwork can use the available printable area across the cover.
Yes. Contact us with the table measurements and shape for a custom quotation.
The usual guide is 3 to 5 working days after artwork approval.
Want to discuss your project?